February 3, 2016-March 3, 2016,
The latest production testing software released by iTest is as follows:

1. New model

Model: BCM4331(Telnet)
Brand: Broadcom
Support: 2.4G+5G
description:
Only test, no calibration, no write value
Version number: 1.16.23.A1
Download link: http://www.itest.cn/cn/article-details-452.html

Model: MT7687(USB)
Brand: MTK
Support: 2.4G
description:
Support frequency offset/power calibration, TX, RX test, write MAC address
Version number: 1.16.23.A1
Download link: http://www.itest.cn/cn/article-details-453.html

2. Upgrade model

Model: BCM5356(TCP)
Brand: Broadcom
Support: 2.4G
description:
Fix the problem that the DUT issued command does not take effect without the "wl" command header
Version number: 1.16.23.A2
Download link: http://www.itest.cn/cn/article-details-442.html

Model: BCM53124_43228(Telnet)
Brand: Broadcom
Support: 2.4G+5G
description:
1. Only test, no calibration, no write value
2. The firmware upgrade of the customer board causes communication abnormalities. Add a configuration line to solve such problems: WT_CLI_ACK_TOKEN
Version number: 1.16.23.A2
Download link: http://www.itest.cn/cn/article-details-443.html

Model: CL1830(Telnet)
Brand: Celeno
Support: 5G
description:
1. Efficiency optimization;
2. Add the function of interpolating the uncalibrated channel;
3. Add restart timeout function; WT_REBOOT_TIMEOUT = 40 // Restart timeout, sec
Version number: 1.16.23.A1
Download link: http://www.itest.cn/cn/article-details-399.html

Model: RTL8197D_8812AR_8192(UDP)
Brand: Realtek
Support: 2.4G+5G+ac
description:
1. Click to start the test in the upper right corner of the realization window, and change the start button on/off to START/STOP.
2. Cancel the shielding function of the OFF state and add a checkBox to close and open the test window
3. Cancel the main switch of test control
4. The background colors of the 4 display windows of the production test UI interface can be freely adjusted, and the relevant configuration Background.ini;
5. Optimize test time;
Version number: 1.16.23.A1
Download link: http://www.itest.cn/cn/article-details-140.html

Model: RTL8188FTV
Brand: Realtek
Support: 2.4G
description:
1. Add the software startup pop-up window, scan and input MAC function.
2. Repair TX verifiy failure due to probabilistic data capture failure of TX, or low capture power and high K value adjustment.
3. Optimize test efficiency.
4. The check efuse function can be blocked
Version number: 1.16.23.A1
Download link: http://www.itest.cn/cn/article-details-391.html

Model: RTL8189FTV
Brand: Realtek
Support: 2.4G
description:
1. Add the software startup pop-up window, scan and input MAC function.
2. Repair TX verifiy failure due to probabilistic data capture failure of TX, or low capture power and high K value adjustment.
3. Optimize test efficiency.
4. The check efuse function can be blocked
Version number: 1.16.23.A1
Download link: http://www.itest.cn/cn/article-details-362.html

Note:
1. If you want to view the list of all iTest production and testing software, please reply "list" in the WeChat public account;
2. If you need to download, please enter the download address in the PC browser and open the download page of the relevant software to download directly (don’t forget the extraction code)