+
  • LINK200-1002.jpg

Link200 Wireless connection tester

Support Wi-Fi 6 signaling mode RF test

 

■   Support WLAN 2.4G & 5G Tx Rx PHY layer

 

■   Support encrypted and open system AP/STA

 

■   Provide Link Tool and Auto Link

Classification:

WLAN Products

Key words:

Link200 Wireless connection tester


Product Consulting
  • Product Description
  • Specification
  • Relevant information
    • Commodity name: Link200 Wireless connection tester

    Support Wi-Fi 6 signaling mode RF test

    Support Wi-Fi 6 signaling mode RF test

     

    ■   Support WLAN 2.4G & 5G Tx Rx PHY layer

     

    ■   Support encrypted and open system AP/STA

     

    ■   Provide Link Tool and Auto Link

  • Introduction:

     

     

     

           Link200 is the second-generation wireless connectivity tester that supports signaling test launched by iTest. On the basis of perfectly inheriting the excellent performance of Link100, it can be used with iTest WT-3XX series instruments,which can perform Wi-Fi 6 signaling mode RF test. Test from the perspective of user mode, by simulating the actual process of sending and receiving signals on the device at the DUT end, detect indicators such as DUT Power, EVM, FreqError, Sensitivity, throughput, etc., and complete functional verification tests, user mode tests, and certification tests.Based on the same WT-2XX/3XX/4XX instrument measurement, it is convenient to compare the difference of DUTindicators in non-signaling mode and signaling mode, and eliminate the error caused by switching different instruments,which provides great convenience for R&D testing.

     

     

    Support business:

         

     

     

    Support Wi-Fi 6

     

    Support 160MHz bandwidth

     

    Support OFDMA

     

    Support signaling

     

    Support WLAN 2.4G & 5G Tx Rx PHY layer

     

    Support 2x2 MIMO in 20/40/80/160 MHz BW

     

    Support encrypted and open system AP/STA    

     

    Support RvR test with one single tester

     

    RF Measurements

     

    Support 802.11 transmitter power, EVM ect.

     

    Support 802.11 receiver sensitivity ect.

     

    Support Cable and OTA test

     

    Support Input Power: +30 dBm ~ -30 dBm       
                  Output Power: 0 dBm~-120 dBm

     

    Scalability

     

    Provide Link Tool and Auto Link

     

    Support DBDC

     

    Support high stress throughput

     

    Support Sniffer mode

     

    Support automated testing to generate results summary report                                                                     

     

     

              

    Link Tool

    Auto Link

     

    Technical Specifications:  

     

    Wireless LAN Measurement Common Specifications

     

     

    Signaling mode         

     

    STA                                              

     

    BCN level from DUT(Input power level):-80 to +30 dBm          

    AP  

     

    BCN Power(Output power level):-100 to 0 dBm

     

     

    Spatial streams

     

     

    SISO to 2x2MIMO, Spatial multiplexing, STBC

     

    Standards

     

    802.11a/b/g/n/ac/ax

     

    Signal bandwidth

     

    20, 40 , 80 or 160 MHz

     

    Supported channels                              

     

    2.4GHz Band         

     

    1-14

     

    5GHz Band

     

    36-173

    Security

     

    Open system, WEP 64/128, WPA-PSK, WPA2-PSK,WPA3                                                                 

     

     

     Wireless LAN RVR Measurement Specifications

     

    Traffic direction

     

    Uplink, Downlink, Bidirection

     

    Traffic type

     

    TCP, UDP

     

     

    Interference source

     

     

    With any WT tester(s)

     

     

    Extension function

     

    DBDC 

     

    Wireless Interface

     

    Link200 unit 

     

    Ethernet Interface

     

    10G/5G/2.5G/100 Mbps adaptive

     

    General and Environmental

     

     

    Attenuation range 

     

    DUT-RF1 TO RF4

    0 to 120dB

     

    Attenuation resolution

     

    0.25dB

     

    Attenuation accuracy

     

    ±0.5dB

     

    Input/Output return loss

     

    >13dB

     

    Port to Port lsolation

     

    >120dB