+
  • a7446bb2-1626-4ee5-bdf9-f7e93d44163b(1).jpg
  • image/5977a895-6bb4-426c-b44a-17b4ca2bb819(1).jpg
  • image/63b19550-e338-431a-8377-6df19a9549b6(1).jpg
  • image/97d2124e-4e7b-49dc-9e63-e2a04875de43(1).jpg

WT-208C Wireless network multiplex test instrument

The king of efficiency that supports full-band testing!
 

■   Supports 400M-6GHz frequency band and it can get more testing capabilities via software upgrade;

■   With advanced high-speed, highisolation switch matrix, it supports 8 -port parallel test and multiple connections to maximize instrument utilization;。

■   Support True-MIMO test;

■   WT-208C can protect DC voltage below 5V. Under the condition of contact discharge, anti-static capacity can reach 7KV.

Classification:

WLAN Products

Key words:

WT-208C Wireless network multiplex test instrument


Product Consulting
  • Specification
  • Relevant information
  • WT-208C is a wireless connectivity tester integrating R&D and production test capabilities. The WT-208C supports True-MIMO test and can meet the complex and detailed test requirements in the R&D environment. It has a very wide working band and can support 400M-6GHz frequency band. Which can perfectly cover the test of the second station of the mobile phone(WBG) and mainstream standards of loT. The WT-208C also performs extremely well on the production line. It has advanced 8-port parallel testing technology that greatly enhanced the production capacity per unit time. And the design of 8 dedicated Ethernet ports makes it easier to build test environments for routers.
     
    Extensible Business:
          ■ WLAN 802.11a/b/g/n/ac/p/ah;
           Bluetooth(1.0/2.0/3.0/4.0/4.1/4.2/5.0)/BLE;
           IoT:ZigBee/Z-Wave;
           GNSS:GPS/BDS;
           MIMO;
     
     

    General Technical
    Input/Output frequency range 400 to 3800 MHz
    4900 to 6000 MHz
    IF bandwidth 120 MHz
    Input power range +30 dBm peak (+25 dBm average)
    Output power range(CW) 0 to -100 dBm(400 to 3800 MHz)
    0 to -120 dBm(GPS)
    -5 to -100 dBm(4900 to 6000 MHz)
    Input power accuracy Specification: ± 0.5 dB
    Typical: ± 0.3 dB
    Output power accuracy Specification: ± 0.75 dB ( 0 to -90 dBm)
    ± 1.50 dB (   -90 to -120 dBm)
    Typical: ± 0.50 dB ( 0 to -90 dBm)
    ± 1.00 dB (   -90 to -120 dBm)
    Input/Output return loss > 13 dB
    Sampling data rate 60, 120 Msps
    Port to Port Isolation >   100 dB (400 to 3800 MHz)
    > 90 dB (4900 to 6001 MHz)
    WiFi(802.11a/b/g/n/ac/p/ah)
    EVM Residual VSA/VSG EVM
    (full packet channel estimation):
    ≤ -44 dB for 20 M(typical: -49 dB)
    ≤ -42 dB for 40 M(typical: -46 dB)
    ≤ -40 dB for 80 M(typical: -43 dB)
    Peak power VSA power   accuracy:± 0.5 dB (+20 to -45 dBm)
    RMS power
    Frequency error VSA measurement   error: ≤ ± 0.2 ppm calibrated
    Spectral mask Spectral mask view: ± 60   MHz
    Spectral   flatness VSA flatness over 80 MHzBW:   ± 0.5 dB
    CCDF(complementary cumulative distribution function) Probability of peak signal power being greater   than a given power level versus peak-to-average power ratio(Db)
    Bluetooth(1.0/2.0/3.0/4.0/4.1/4.2/5.0)/BLE
    TX output   power ± 0.5 dB (+20 to -45 dBm)
    TX output   spectrum
    Modulation   characteristics (For EVM better than -25 dB)
    VSA measurement error: ±   0.2 ppm calibrated
    Carrier   frequency tolerance
    Carrier   frequency drift
    RMS EVM (EDR) Residual VSA EVM: -35 dB (+20 to -30 dBm)
    Residual VSG EVM:
      -35 dB (-10 to -70 dBm)
    Peak EVM (EDR)
    ZigBee(802.15.4)
    Output power VSA power accuracy: ± 0.5 dB (+20 to -45 dBm)
    Power spectral density
    Center Frequency Tolerance VSA   frequency accuracy: ≤ ± 0.2 ppm calibrated
    EVM Offset:compensate the I and Q offset in OQPSK
    Normal:no compensation applied
    Navigation
    Test Capability Carrier-to-noise ratio
    Output frequency range GPS: 1575.42 MHz (fixed)
    Number of simultaneous channels 1
    Output power range -60 to -120 dBm